A flight arrival should be matched to the next connection as a timing problem: check the flight's arrival information, identify the onward transport option, and compare the intended departure with the time available after arrival. The airport app provides real-time flight information, the arrivals guidance lists onward city transport choices, and the cited rail timetable lists first and last train times for each direction. Those first and last times alone are not a complete departure list, and no standard transfer buffer is stated, so a specific pairing remains unconfirmed until the exact departure and transfer conditions are checked.
Start with the flight
The check should begin with the airport app's real-time flight information. The traveler should record the displayed arrival details and repeat the comparison if those details change instead of relying on an earlier time. The flight time is a reference point, not proof of when the traveler reaches the onward departure point; the cited guidance gives no time allowance between the two.
Identify the onward leg
The airport's arrivals information can be used to identify the city transport choices that follow the flight. The relevant choice must then be matched to the next destination. The cited page confirms that onward choices are listed, but it does not provide route details, journey times, fares, or service frequency. Those points require separate confirmation.
Test the rail connection
For the airport rail connection, the first and last train times in the relevant direction are boundary checks. They do not show that a train departs at the flight's exact arrival time. The basic test is whether the arrival information, plus the time required to reach the rail departure point, is no later than the intended departure.
The listing of first and last times does not identify which intermediate train corresponds to a particular arrival, and the available guidance does not state a standard transfer time or a disruption rule. A pairing close to the last train should remain unconfirmed until the exact current departure and transfer conditions are checked.
What the traveler must still confirm
Before relying on the pairing, the traveler must check:
- the latest flight arrival information;
- the onward transport option and its exact departure time;
- the current departure in the correct direction, rather than only the first or last time;
- the time needed to reach the rail departure point and any transfer conditions; and
- the applicable fare and ticket conditions.
Fares, ticket conditions, transfer buffers, and disruption rules are not stated in the available guidance. Until those points and the exact departure are verified, the arrival and onward service should be recorded as a possible match, not a confirmed connection.